Can you clean a whiteboard with a wet paper towel?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Can you clean a whiteboard with a paper towel?

With the cleaning products we've listed, we recommend using a microfiber cloth to prevent potential scratches. Never use paper towels or other abrasive cleaning cloths as they will inevitably damage the surface of your whiteboard.

What is the best thing to clean a whiteboard with?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

Is it OK to use water on a dry-erase board?

If you have no whiteboard cleaner on hand, you can easily make your own substitute with common ingredients. Simply mixing water with ingredients such as isopropyl alcohol or peroxide can quickly create an effective homemade whiteboard cleaner.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

How To Clean Whiteboards and Dry Erase Boards

Do wet wipes damage whiteboards?

Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Does hand sanitizer clean whiteboards?

To clean a whiteboard, you can use a specially formulated whiteboard cleaner like the expo whiteboard cleaner that are available on Amazon. Or, you can use household products like rubbing alcohol, hand sanitizer, nail polish remover, vinegar, and windex.

How do I make my whiteboard white again?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

How do you rehydrate a whiteboard?

Or, you can prepare a mixture that is 50 percent tap water and 50 percent isopropyl rubbing alcohol. Wipe the whiteboard, then dry it off with a clean cloth to remove alcohol remnants—don't let alcohol dry on the board.

How do you refresh a whiteboard?

To fix both of these problems, put some isopropyl alcohol on a paper towel, and wipe down the entire board. Switch paper towels as it starts getting dry or as it fills up with stains. Repeat as necessary until the entire whiteboard feels smooth to the touch.

Will vinegar clean a whiteboard?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Can you clean a whiteboard with alcohol wipes?

Avoid cleaning your whiteboard with products containing alcohol, ammonia, bleach, or any harsh chemicals. These substances can damage the whiteboard surface and reduce its lubrication over time, resulting in whiteboards that are difficult to clean.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

What is the difference between wet erase and dry erase?

Wet erase markers contain water-soluble dyes and are intended for acetate, film or non-porous laminated surfaces. Wet erase markers can only be removed with a damp tissue or cloth. Dry erase markers erase with an eraser on most non-porous materials, like whiteboards, porcelain, melamine and glass.

Can you revive a whiteboard?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

How do I remove ghosting from my whiteboard?

If you've accidentally used the wrong kind of marker on your board, usually rubbing alcohol can reduce the damage. Dampen a cloth with the alcohol and wipe the board in a circular motion. You may need to repeat a few times to get everything off.

Why is my new whiteboard hard to erase?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Does rubbing alcohol damage whiteboards?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

Can you use methylated spirits to clean a whiteboard?

Always use whiteboard cleaning solution as household and other cleaners can damage the board surface. Heavy staining can be removed with isopropyl-alcohol or methylated spirits. Take extreme care using these products on printed boards.

Is whiteboard cleaner just alcohol?

Most will contain Isopropyl alcohol to dissolve the marker ink, water, and a bit of soap to remove body oils from the white board. Surfactants, fragrances and other chemicals may also be used.

Can you clean a whiteboard with soap?

To clean (on an as-needed basis), rinse the entire writing surface with soapy water and then dry with a soft cloth. To remove any permanent marker ink, use a solvent such as acetone, diluted rubbing alcohol or our own eco-friendly whiteboard cleaner formulated specifically for dry erase surfaces.

Can you use magic eraser on white board?

The dry Magic Eraser helps you remove chalk from blackboards as well as dry erasable whiteboard marker ink. Its high performance means it can tackle even the most stubborn marks – it simply erases them! Ideal for the thorough cleaning of almost all types of whiteboard, for example for removing "ink shadows".

Can acetone clean whiteboard?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.