Can you use bleach on a dry erase board?

Do not use bleach.) Keep your marker tray clean so no dirt or debris sticks to your cloth when erasing, which could scratch the writing surface.

What is the best thing to clean a dry erase board with?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

How do I make my whiteboard white again?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers.

What not to use on dry erase board?

Avoid cleaning your whiteboard with standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol, in addition to Coarse or granular cloth like paper towels and toilet paper, as they tend to deteriorate the dry erase surface. Clean your whiteboard at least once a week.

How do you restore a whiteboard that won't erase?

Isopropyl Alcohol – similar to methylated spirits the high alcohol content when used with a soft cloth helps to dissolve and loosen stubborn ink whilst also degreasing the whiteboard surface helping to prevent staining. The alcohol evaporates leaving a clean surface behind.

How To Clean Whiteboards and Dry Erase Boards

Can you revive an old whiteboard?

You can turn the writable surface of your whiteboard into a writable, projectable, and magnetic surface. Apply a few coats of magnetic paint on your old whiteboard and apply a coat of matt whiteboard paint to it. It will give you a brand new whiteboard that you can write on, project on, and stick magnets to.

Can bleach clean a white board?

Clorox with Bleach: While we liked that you could spray the solution directly onto the whiteboard, it dripped down a lot, so you had to wipe it up right away. The Clorox seemed to perform best on the traditional whiteboard surface (not paint or film), and when the staining wasn't too severe.

Will vinegar ruin a dry erase board?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Does hand sanitizer clean whiteboards?

Often full of isopropyl alcohol, hand sanitizer is another approved compound that can be used to clean off whiteboard marker ink. Whether the active ingredient is isopropyl alcohol or ethanol, the nature of hand sanitizer makes it extremely effective when used to clean whiteboards.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

Can you use glass cleaner on whiteboards?

Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

Can you use acetone to clean a whiteboard?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.

Can you use WD-40 on dry erase board?

Sure, using WD-40 might temporarily remove those stubborn stains and markings that regular cleaning methods can't handle. But don't be fooled, my friend! It's not a long-term solution. In fact, it can actually make things worse!

Can you clean a dry erase board with baby wipes?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

What is the life expectancy of a whiteboard?

These boards can quickly become discolored with daily use, especially when they aren't properly cleaned. The discolored and stained boards can become difficult to write on and even more difficult to see from long distances. You need to replace these boards every few years if you plan on using them daily.

Can dry erase boards go bad?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Can you redo a dry erase board?

Just like resurfacing panels, dry erase film can be applied over old whiteboard surfaces. Whiteboard film generally is sold in rolls, with lengths sufficient to resurface several boards. Our sister company Everase sells dry erase resurfacing films.

Can you use water on dry erase?

If you have no whiteboard cleaner on hand, you can easily make your own substitute with common ingredients. Simply mixing water with ingredients such as isopropyl alcohol or peroxide can quickly create an effective homemade whiteboard cleaner.

Why do some dry erase markers not erase?

Dry erase ink contains pigments and release agents. The release agents prevent the pigments from sticking to dry erase boards and non-porous surfaces. However, these small particles of color become trapped when they come in contact with clothing fibers and other porous objects and surfaces.

Why is my dry erase marker disappearing?

Ghosting is when your dry erase marker ink bleeds into the surface of your board. Ghosting can be caused by one of four reasons; it can be cause by dirty erasers, by erasing marker that is still wet, by using the wrong kind of marker or by using the board too frequently.

Can I clean a whiteboard with dish soap?

Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.

Can you use soap and water to clean a whiteboard?

To keep your board looking brand new, periodically wash the entire board with soapy water, then wipe with a damp towel to remove all soapy residue, and then dry with a soft cloth.

What is ghosting on a dry erase board?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.