Can you use glass cleaner on whiteboards?

Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

Can you use glass cleaner to clean a whiteboard?

By using a spray-on solution of glass cleaner, the whiteboard can be thoroughly cleaned. Simply spray the board and rub it with a microfiber cloth, then rinse with water.

Is Windex OK to use on whiteboard?

Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.

What is the best cleaner for whiteboards?

WD-40: Ideal for when something isn't moving, and it needs to. This applies not only to nuts and bolts, but to stains on a whiteboard as well. When that whiteboard marker just won't fully erase, spray WD-40 either onto a microfiber cloth or directly onto the board, and start cleaning.

What can I use if I don't have whiteboard cleaner?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

How To Clean Whiteboards and Dry Erase Boards

Does rubbing alcohol damage whiteboards?

When rubbing alcohol is used to clean the board, it can dissolve this coating, making it less effective at erasing ink in the future. Additionally, using rubbing alcohol too frequently can cause the whiteboard to become dull and faded, reducing its lifespan and usability.

Can you clean a whiteboard with alcohol wipes?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

Can you use magic eraser on white board?

The dry Magic Eraser helps you remove chalk from blackboards as well as dry erasable whiteboard marker ink. Its high performance means it can tackle even the most stubborn marks – it simply erases them! Ideal for the thorough cleaning of almost all types of whiteboard, for example for removing "ink shadows".

Can you clean whiteboards with Clorox wipes?

Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth.

Will vinegar clean a whiteboard?

You can add one teaspoon of vinegar per cup of water; use a microfiber cloth to clean the whiteboard. Paper Towel and Water: This is a quick, chemical-free way to clean the surface of your board, but may not remove old stains or ghosting.

Can you use Dawn on a whiteboard?

Spray a small amount onto a microfiber cloth before use. Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.

Will Windex ruin a dry erase board?

Windex – Spray Windex on the board and wipe off with a soft, lint-free cloth. Don't use Windex on a melamine-based whiteboard, or it will ruin it.

How do I clean my Microsoft whiteboard?

What damages whiteboards?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Why is my whiteboard so hard to erase?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

How do you restore a whiteboard that won't erase?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

Can you use baby wipes on a whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Can you clean a dry erase board with baby wipes?

Baby wipes may not be the most ideal choice for whiteboard surfaces because their moisture may not be sufficient for effective cleaning of the whiteboard surface. Additionally, baby wipes usually contain gentle moisturizers that can leave residues or cause staining on the whiteboard.

What is the difference between wet erase and dry erase?

Wet erase markers contain water-soluble dyes and are intended for acetate, film or non-porous laminated surfaces. Wet erase markers can only be removed with a damp tissue or cloth. Dry erase markers erase with an eraser on most non-porous materials, like whiteboards, porcelain, melamine and glass.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

Can I use a magic eraser on my teeth?

Magic Eraser may be a good stain remover for your stove, sink and walls, but not your teeth, says Josi Stephenson, DDS, health center dentist. There are many reasons teeth can be discolored. Usually, diet and lack of regular brushing are the main culprits.

Where not to use magic eraser?

Is whiteboard cleaner just alcohol?

Most will contain Isopropyl alcohol to dissolve the marker ink, water, and a bit of soap to remove body oils from the white board. Surfactants, fragrances and other chemicals may also be used.

Does acetone clean whiteboards?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.

Can you clean a whiteboard with soap?

To clean (on an as-needed basis), rinse the entire writing surface with soapy water and then dry with a soft cloth. To remove any permanent marker ink, use a solvent such as acetone, diluted rubbing alcohol or our own eco-friendly whiteboard cleaner formulated specifically for dry erase surfaces.