How do I get my dry erase board white again?

Mix the alcohol or peroxide with water (one, apply the solution to a cloth (preferably with a microfiber cloth or other non-abrasive cloth), and wipe the whiteboard clean. For stubborn stains, rub isopropyl alcohol directly on the area.

How do I make my whiteboard white again?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

How do you bring a whiteboard back to life?

Isopropyl Alcohol – similar to methylated spirits the high alcohol content when used with a soft cloth helps to dissolve and loosen stubborn ink whilst also degreasing the whiteboard surface helping to prevent staining. The alcohol evaporates leaving a clean surface behind.

How do you restore a whiteboard coating?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

How do you clean a whiteboard that won't wipe?

When that whiteboard marker just won't fully erase, spray WD-40 either onto a microfiber cloth or directly onto the board, and start cleaning. Not only will all marks be completely erased, but WD-40 actually has the power to refinish your whiteboard- restoring it to its former luster and shine once again.

How To Clean Whiteboards and Dry Erase Boards

Will vinegar clean a whiteboard?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Does WD-40 restore whiteboards?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

What is the best cleaner for whiteboards?

Vinegar and Water: People have been using vinegar and water as a cleaning agent for years. You can add one teaspoon of vinegar per cup of water; use a microfiber cloth to clean the whiteboard.

Do whiteboards stop working?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Can you use bleach on a dry erase board?

Do not use bleach.) Keep your marker tray clean so no dirt or debris sticks to your cloth when erasing, which could scratch the writing surface.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

Does hand sanitizer clean whiteboards?

To clean a whiteboard, you can use a specially formulated whiteboard cleaner like the expo whiteboard cleaner that are available on Amazon. Or, you can use household products like rubbing alcohol, hand sanitizer, nail polish remover, vinegar, and windex.

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

What is the life expectancy of a whiteboard?

Whiteboards that are made from plastic will have a lifespan of between 1-5 years, whereas those made from more durable materials can last from 10-20 years, or even longer. As with any office furnishing, it pays to take good care of your whiteboard.

Can you use acetone to clean a whiteboard?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Can you clean a whiteboard with white spirit?

isopropyl alcohol can be applied to the surface. Apply with a soft, scratch free cloth. Apply a warm water solution to the surface after this and then buff dry with the another soft cloth. Mineral turps, petrol, kerosene, methylated spirits are not recommended as they all leave a 'film' over the whiteboard surface.

How do you clean a whiteboard with Hairspray?

Hairspray dissolves the maker's ink and makes it easy to remove. Spray a layer of hairspray over the permanent marker and leave it for a few seconds. Wipe your whiteboard clean with a paper towel. If your whiteboard feels sticky, take a damp cloth to wipe the surface of the whiteboard.

Can you use methylated spirits to clean a whiteboard?

Always use whiteboard cleaning solution as household and other cleaners can damage the board surface. Heavy staining can be removed with isopropyl-alcohol or methylated spirits. Take extreme care using these products on printed boards.

What is ghosting on a whiteboard?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.

Does WD-40 damage whiteboard?

Firstly, because WD-40 is oil-based, it attracts dust and dirt, making it even harder to clean your board in the future. Secondly, the chemicals in WD-40 can break down the surface of your whiteboard, making it more difficult to write on over time. Yikes!

Can you use magic erasers on whiteboards?

Ideal for the thorough cleaning of almost all types of whiteboard, for example for removing "ink shadows". Please test in an inconspicuous area before use! The abrasive foam works like very gentle sandpaper.

Can I clean a whiteboard with dish soap?

Generic Whiteboard Cleaner: An obvious choice, but very effective! Spray a small amount onto a microfiber cloth before use. Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.