How do you rejuvenate a whiteboard?

Isopropyl Alcohol – similar to methylated spirits the high alcohol content when used with a soft cloth helps to dissolve and loosen stubborn ink whilst also degreasing the whiteboard surface helping to prevent staining. The alcohol evaporates leaving a clean surface behind.

How do you bring a whiteboard back to life?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

How do I make my whiteboard white again?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

How do you restore a whiteboard coating?

The good news is that it's easy to fix this: Remove the old ink residue with a product like the Smart Pro Cleaner and a microfibre cloth. This will restore the board surface to its best condition. Mix together in a bowl and clean the surface with a microfibre cloth.

Does WD-40 restore whiteboards?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

How to renew a white board. The magic of WD40. Easily refresh, and resurface a whiteboard cheep.

Is vinegar good for dry erase board?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

Can you recoat a whiteboard?

Just like resurfacing panels, dry erase film can be applied over old whiteboard surfaces. Whiteboard film generally is sold in rolls, with lengths sufficient to resurface several boards. Our sister company Everase sells dry erase resurfacing films.

Does rubbing alcohol damage whiteboards?

When rubbing alcohol is used to clean the board, it can dissolve this coating, making it less effective at erasing ink in the future. Additionally, using rubbing alcohol too frequently can cause the whiteboard to become dull and faded, reducing its lifespan and usability.

What is the best cleaner for whiteboards?

WD-40: Ideal for when something isn't moving, and it needs to. This applies not only to nuts and bolts, but to stains on a whiteboard as well. When that whiteboard marker just won't fully erase, spray WD-40 either onto a microfiber cloth or directly onto the board, and start cleaning.

Can I use Windex on a whiteboard?

Can you use Windex® to clean a dry erase board? Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

Can you use a magic eraser on a whiteboard?

Ideal for the thorough cleaning of almost all types of whiteboard, for example for removing "ink shadows". Please test in an inconspicuous area before use! The abrasive foam works like very gentle sandpaper.

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

What is the life expectancy of a whiteboard?

Whiteboards that are made from plastic will have a lifespan of between 1-5 years, whereas those made from more durable materials can last from 10-20 years, or even longer. As with any office furnishing, it pays to take good care of your whiteboard.

Can whiteboards go bad?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

How do you fix a whiteboard that won't erase?

Spray the whiteboard with WD-40, using a light misting over the whole board. WD-40 is a light oil that will keep the board slick. This allows you to write on it without the ink drying into the board and leaving permanent marks. While it may make the board a bit slippery, it will be usable.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

Is it OK to use Clorox wipes on whiteboard?

With holiday breaks getting closer, it's about time to clean off the reminders that have been on the white board all season. But that can be surprisingly tough. Some markers just won't wipe off.

How do I restore my whiteboard Reddit?

If you have created a stain on your board, use WD-40, as it will restore your board while also lifting the stain. If it is a stubborn stain, let the WD-40 stand for a few minutes before wiping it off.

Should I oil my whiteboard?

A whiteboard is a magnetic surface, so using a magnetic dry erase marker helps keep the board looking new and prevents any ghosting or staining. If you don't have any of those markers on hand or want to use a different type of pen for writing, a very light coating of vegetable oil will also help protect the surface.

Does WD-40 damage whiteboard?

Firstly, because WD-40 is oil-based, it attracts dust and dirt, making it even harder to clean your board in the future. Secondly, the chemicals in WD-40 can break down the surface of your whiteboard, making it more difficult to write on over time. Yikes!

Can you clean a whiteboard with hydrogen peroxide?

Hydrogen Peroxide

To use it for cleaning your whiteboard, pour a few drops onto a clean cloth and swab the board until the markings have gotten cleared. For areas with persistent stains, you can rub a more generous amount of hydrogen peroxide on those spots.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)