Is Windex bad for whiteboards?

Can you use Windex® to clean a dry erase board? Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

Is it safe to use Windex on a whiteboard?

Yes, Windex can be used to clean a dry-erase board, but only on certain types of boards. For porcelain and glass dry-erase boards, Windex is an effective chemical-based cleaner. However, Windex can damage the surface of melamine dry-erase boards, so it is not recommended for these types of boards.

What is the best thing to clean whiteboards with?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

What can I use if I don't have whiteboard cleaner?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

Is Windex Good Enough To Clean Whiteboards?

Does hand sanitizer clean whiteboards?

Often full of isopropyl alcohol, hand sanitizer is another approved compound that can be used to clean off whiteboard marker ink. Whether the active ingredient is isopropyl alcohol or ethanol, the nature of hand sanitizer makes it extremely effective when used to clean whiteboards.

Does WD-40 restore whiteboards?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

What ruins a whiteboard?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Is hand sanitizer bad for whiteboards?

Therefore, hand sanitizers may not be the ideal choice as they can leave residues or cause staining on the whiteboard surface.

Can I use all purpose cleaner on a whiteboard?

Using harsh chemicals, scrubbing powders, or most household all-purpose cleaners on whiteboards will damage the finish by scratching or pitting the melamine or leave a residue that makes the whiteboard ineffective.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

How do you revive a whiteboard?

The good news is that it's easy to fix this: Remove the old ink residue with a product like the Smart Pro Cleaner and a microfibre cloth. This will restore the board surface to its best condition. Mix together in a bowl and clean the surface with a microfibre cloth.

How do you renew a whiteboard?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

Does alcohol ruin whiteboards?

Avoid cleaning your whiteboard with products containing alcohol, ammonia, bleach, or any harsh chemicals. These substances can damage the whiteboard surface and reduce its lubrication over time, resulting in whiteboards that are difficult to clean.

How do you restore a whiteboard that won't erase?

Or, you can prepare a mixture that is 50 percent tap water and 50 percent isopropyl rubbing alcohol. Wipe the whiteboard, then dry it off with a clean cloth to remove alcohol remnants—don't let alcohol dry on the board.

Can bleach clean a whiteboard?

Clorox with Bleach: While we liked that you could spray the solution directly onto the whiteboard, it dripped down a lot, so you had to wipe it up right away. The Clorox seemed to perform best on the traditional whiteboard surface (not paint or film), and when the staining wasn't too severe.

Does vinegar damage whiteboards?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Is whiteboard cleaner just alcohol?

Most will contain Isopropyl alcohol to dissolve the marker ink, water, and a bit of soap to remove body oils from the white board. Surfactants, fragrances and other chemicals may also be used.

Can I use Colin on whiteboard?

Originally Answered: What are the best materials used to clean a whiteboard? Any cloth or normal duster, if the stains are bit dense (from prolonged use) spray a little bit of coleen or any alcohol-based cleaner and it will shine like new.

What is the life expectancy of a whiteboard?

Whiteboards that are made from plastic will have a lifespan of between 1-5 years, whereas those made from more durable materials can last from 10-20 years, or even longer. As with any office furnishing, it pays to take good care of your whiteboard.

What is ghosting on a whiteboard?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.

Can you recoat a whiteboard?

Just like resurfacing panels, dry erase film can be applied over old whiteboard surfaces. Whiteboard film generally is sold in rolls, with lengths sufficient to resurface several boards. Our sister company Everase sells dry erase resurfacing films.

Can you clean a whiteboard with baby wipes?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Do whiteboards go bad?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Does acetone clean whiteboards?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.