Should I oil my whiteboard?

Whatever you do, don't give in to the temptation to use household items such as nail polish, baby oil, WD-40, or other liquids to clean your board. Not only can these things possibly damage your board, they could be hazardous to your health as well.

How do you lubricate a whiteboard?

Spray your whiteboard generously with WD-40 using the spray nozzle (not the tube.) I cover the edges of my whiteboard with painter's tape to avoid spraying the wood finish. Use a paper towel to spread the coating evenly across the entire whiteboard.

Does WD-40 restore whiteboards?

If you have a can of WD-40, you can spray it on a dry erase board, then wipe it off to clean the whiteboard. Besides cleaning marks from your dry erase board, it revives the finish, making it slick and smooth and prepped for writing. Be careful in applying it, though.

What can I put on a whiteboard to make it erase better?

How do you maintain a whiteboard?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

Master Your WHITEBOARD. Master Your PRODUCTIVITY.

What is the life expectancy of a whiteboard?

Whiteboards that are made from plastic will have a lifespan of between 1-5 years, whereas those made from more durable materials can last from 10-20 years, or even longer. As with any office furnishing, it pays to take good care of your whiteboard.

Will rubbing alcohol damage a white board?

Avoid cleaning your whiteboard with products containing alcohol, ammonia, bleach, or any harsh chemicals. These substances can damage the whiteboard surface and reduce its lubrication over time, resulting in whiteboards that are difficult to clean.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

Why is my new whiteboard hard to erase?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Can you recoat a whiteboard?

Just like resurfacing panels, dry erase film can be applied over old whiteboard surfaces. Whiteboard film generally is sold in rolls, with lengths sufficient to resurface several boards. Our sister company Everase sells dry erase resurfacing films.

Can you revive an old whiteboard?

The good news is that it's easy to fix this: Remove the old ink residue with a product like the Smart Pro Cleaner and a microfibre cloth. This will restore the board surface to its best condition. Mix together in a bowl and clean the surface with a microfibre cloth.

Can I use Windex on a whiteboard?

Can you use Windex® to clean a dry erase board? Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

What damages whiteboards?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Does isopropyl alcohol clean whiteboards?

For persistent ghosting and other whiteboard stains, isopropyl alcohol will do the trick. It's important to have 90% or higher, since the concentrated alcohol is what breaks down ink stains and leaves your whiteboard looking brand new.

Can you use magic eraser on dry erase board?

Simply dampen the Magic Eraser with water and gently scrub the surface of the dry erase board to remove the markings and stains. Be sure to test a small area first to ensure that the Magic Eraser does not damage the board's surface.

Does WD-40 damage whiteboard?

Firstly, because WD-40 is oil-based, it attracts dust and dirt, making it even harder to clean your board in the future. Secondly, the chemicals in WD-40 can break down the surface of your whiteboard, making it more difficult to write on over time. Yikes!

Is it OK to use Clorox wipes on whiteboard?

With holiday breaks getting closer, it's about time to clean off the reminders that have been on the white board all season. But that can be surprisingly tough. Some markers just won't wipe off.

Will Magic eraser damage white board?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface.

Does vinegar damage whiteboards?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Does Goo Gone ruin whiteboards?

If your whiteboard is used daily, it should be cleaned daily. Goo Gone is a great way to remove dry erase markers, but not wet erase markers. If there are stickers or tape on the surface, remove only with Goo Gone. Follow the maintenance instructions, if provided.

What is the difference between a whiteboard and a dry erase board?

To clear up this confusion, you can rest assured that the expressions whiteboard and dry erase board are synonymous; that is, they have exactly the same meaning.

Why do whiteboards cost so much?

The raw materials that go into these high-priced boards, such as steel, aluminum, and the ceramic ingredients used in firing porcelain enamel, are quite costly, and the manufacturing processes used to produce them consume a massive amount of energy, all of which contribute to their high cost.

Why do whiteboards ghost?

Ghosting is when your dry erase marker ink bleeds into the surface of your board. Ghosting can be caused by one of four reasons; it can be cause by dirty erasers, by erasing marker that is still wet, by using the wrong kind of marker or by using the board too frequently.

Can you use Dawn on a whiteboard?

Spray a small amount onto a microfiber cloth before use. Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.