What grade is 64 percent in GCSE?

Ofqual's indicative grade boundaries (pages 13 - 15) According to this illustration, grade 4 requires 56 - 66 per cent, grade 5 requires 67 - 77 per cent and grade 6 requires 78 - 88 per cent.

What GCSE grade is 69%?

If a paper is allocated 120 uniform marks, the range of marks allocated to grade B is 84 to 95 (70% to 79% of 120); for grade C, 72 to 83 (60% to 69% of 120).

What percent is a Grade 9 in GCSE?

Grade 9 is considered to be higher than an A* and roughly the top 20% of GCSE students who achieve a grade 7 or above will achieve a grade 9.

What GCSE grade is 59%?

A mark of 59 would therefore be a C grade. For modular qualifications, assessments can be taken in various exam sessions throughout the duration of the course.

What grade is 50% in maths GCSE?

Approximately 50% of the marks on the higher paper are aimed at grade 7 and above (this is the usual requirement for entry to an A-level Maths course), so most of a higher paper will be too difficult to someone who's doubtful of achieving Grade 4.

What is the difference between the new (9 to 1) GCSE grades and the old (A* to G) GCSE grades?

What is 60 percent at GCSE?

If a paper is allocated 120 uniform marks, the range of marks allocated to grade B is 84 to 95 (70% to 79% of 120); for grade C, 72 to 83 (60% to 69% of 120). 3 The two AQA units give the scaled mark grade boundaries in 2015 scaled up to 100 per cent by way of illustration.

What grade is 60% in a level maths?

C 60%-69% D 50%-59% E 40%-49% (this is considered a pass) U 0%-39%

What grade is 67 in GCSE?

In the GCSE grading system, a score of 67% would typically translate to a grade of 6 or 7, which is equivalent to a B or A in the traditional grading system. However, the level of "good" can vary depending on personal expectations, the difficulty of the exam, and the overall performance of the class.

What is 70 at GCSE?

These boundaries are set by exam boards and represent the minimum mark needed to achieve a particular grade. For example, if the grade boundary for a grade 7 in a particular GCSE exam is 70 marks, any student who scores 70 marks or above will receive a grade 7.

Is 59 an F grade?

C - this is a grade that rests right in the middle. C is anywhere between 70% and 79% D - this is still a passing grade, and it's between 59% and 69% F - this is a failing grade.

Is 7 a good GCSE grade?

The highest grade you can get is a 9, with 1 being the lowest. This system was introduced in 2017, replacing the old GCSE grading system that awarded students letter grades from A* to G. In the current grading system, a score of 9, 8 and 7 are equivalent to an A* and A.

How rare is a 9 in GCSE?

In 2023, 4.9 percent of GSCE entries in the England were awarded the highest grade of 9, with a further 7.1 percent of entries being awarded an 8, the second-highest grade.

Is 69 a failing grade?

A letter grade of a D is technically considered passing because it not a failure. A D is any percentage between 60-69%, whereas a failure occurs below 60%.

What percentage is an A * in GCSE?

For example, a student who gets the minimum mark necessary for a Grade A* obtains a percentage uniform mark of 90. A student who gets a mark halfway between the Grade D threshold and Grade C threshold achieves a percentage uniform mark of 55. is no Grade 'a*', the percentage uniform mark range for Grade 'a' is 80–100.

Is 50% a pass in GCSE?

Each GCSE exam board has only slightly different pass grade boundaries each year. Typically this is somewhere between 30% – 50%.

What is a fail in GCSE?

If students get a grade of 5-6, this means that they have a strong pass and if their grade is 4, then they have a standard pass. Unfortunately, if they receive a grade below 4, this means they have not passed the GCSE exam. Remember, a lower score on the GCSE exam doesn't have to mean that they've failed.

What grade is 80 percent in GCSE chemistry?

Subject Level Uniform Mark boundaries (grades A to G) carry the same % weighting across both Grading Routes: i.e. A 80%, B 73%, C* 67%, C 60%, D 50%, E 40%, F 30% and G 20% UMS boundaries at Unit Level are stable for the lifetime of the specification and will not change.

Is 67 a failing grade?

Numerical and letter grades

In primary and secondary schools, a D is usually the lowest passing grade. However, there are some schools that consider a C the lowest passing grade, so the general standard is that anything below a 60% or 70% is failing, depending on the grading scale.

Is 67 a good grade UK?

The grading system varies slightly between universities, but generally, a score of 70 or above is considered a First-class Honours degree, 60-69 is an Upper Second-class Honours degree, 50-59 is a Lower Second-class Honours degree, 40-49 is a Third-class Honours degree, and below 40 is a Fail.