What is 40% in GCSE?

Treating 10 per cent as the highest feasible mark for Ungraded as usually at present and dividing 11 to 55 marks in three equal mark-ranges of 15, grade 1 would require 11 – 25 per cent, grade 2 = 26 – 40 per cent and grade 3 = 41 – 55 per cent.

What GCSE grade is 30%?

5 = Low B or high C grade (roughly 30%). This is considered a "strong pass." 4 = Low C grade (roughly 25%).

What grade is 50 percent in GCSE?

As a rough example, in a higher-tier maths exam, you can expect to gain a grade 6 with a 50-70 per cent overall mark, and an 8 if you achieve 86 per cent or more. Grade 9 is reserved for the upper half of the old-style A* (over 90 per cent in the paper overall).

What is 20% as a GCSE grade?

Setting grade standards for GCSEs

The approach to awarding the top grades will be the same for all GCSE subjects. A formula is used which means that around 20% of all grades at 7 or above will be a grade 9. The grade 8 boundary will be equally spaced between the grade 7 and grade 9 boundaries.

What percentage is a 9 at GCSE?

A 9 is for a student who has performed exceptionally well – usually in the top 5% of the cohort. A Grade 7 has been matched to the bottom of the old Grade A and Grade 1 aligns with the bottom of the old Grade G. Grade 4 is a standard pass. Grade 5 is known as a strong pass.

What is 10% of 40?

What GCSE grade is 70%?

For example, if the grade boundary for a grade 7 in a particular GCSE exam is 70 marks, any student who scores 70 marks or above will receive a grade 7.

What GCSE grade is 82%?

Ofqual's indicative grade boundaries (pages 13 - 15)

According to this illustration, grade 4 requires 56 - 66 per cent, grade 5 requires 67 - 77 per cent and grade 6 requires 78 - 88 per cent.

What GCSE grade is 84%?

If a paper is allocated 120 uniform marks, the range of marks allocated to grade B is 84 to 95 (70% to 79% of 120); for grade C, 72 to 83 (60% to 69% of 120).

What GCSE grade is 59%?

A grade boundary is the minimum mark at which a letter grade can be achieved. For example, if the grade boundary for a B is 60 marks, then 60 is the minimum mark at which a B can be achieved. A mark of 59 would therefore be a C grade.

Is 50% a failing grade?

Because in most cases, a grade is 50 is defined as non-passing performance. A popular grading scale used in many school districts in the United States is a 10-point absolute scale, 90-100 = A, 80-89 = B, 70-79 = C, 60-69 = D, and 0-59 = F.

Is 70 percent an A in GCSE?

As per the old system, scoring 70 per cent means acquiring a lower grade A. When we compare the old system to the new one, with reference to the table above, we can see that 70 per cent is equivalent to a GCSE grade 7.

Is 44 a pass in science GCSE?

The DfE have confirmed that a grade 4 is a standard pass and grade 5 is a strong pass. For Combined Science this means that it would equate to a grade 4-4 being a standard pass.

What is 69 in GCSE grade?

These are given in raw marks. A grade boundary is the minimum mark at which a numbered grade (between 9 and 1) can be achieved. For example, if the grade boundary for a Grade 6 is 70 marks, then 70 is the minimum mark at which a Grade 6 can be achieved. A mark of 69 would therefore be a Grade 5.

Is 59 a failing grade?

However, there are some schools that consider a C the lowest passing grade, so the general standard is that anything below a 60% or 70% is failing, depending on the grading scale. In college and universities, a D is considered to be an unsatisfactory passing grade.

How do I calculate my GCSE grade?

You get your total mark by multiplying your raw marks by the weighting factor and then adding these marks together. We check the total mark against the qualification grade boundaries to get your qualification grade.

What grade is 83% in Maths GCSE?

students gained an A*-C grade, in Maths the figure was 83%. If results are maintained with the current year 10 cohort, then the same percentage of students will gain grade 4's or above. A grade 5 is intended to act as a benchmark against international standards.

What grade is 80 percent in GCSE chemistry?

Subject Level Uniform Mark boundaries (grades A to G) carry the same % weighting across both Grading Routes: i.e. A 80%, B 73%, C* 67%, C 60%, D 50%, E 40%, F 30% and G 20% UMS boundaries at Unit Level are stable for the lifetime of the specification and will not change.