What is class 2 division 1 grade?

Honours grade = 80.375 (class 2, Division 1) 85%-100% : class 1. 75%- 85% : class 2, Division 1.

What does Class 2 Division 1 mean?

Grade boundaries can vary by institution, but typical values are given below. First Class Honours (1st, 1 or I) – typically 70% or higher. Second Class Honours; Upper division (2:1, 2i or II-1) – typically 60–69% Lower division (2:2, 2ii or II-2) – typically 50–59%

What is class 2 div 1?

Class II, Division 1 locations include areas where combustible dust may be in suspension in the air under normal conditions in sufficient quantities to produce explosive or ignitable mixtures (Dust may be emitted into the air continuously, intermittently or periodically), or where failure or malfunction of equipment ...

What is a Class 1 Division 2 rating?

Class I Hazardous Locations refer to facilities which deal with flammable gases, vapors, and liquids. Division 2 specifies that these flammable materials are handled, processed, or used in the defined hazardous location, but not normally present in concentrations high enough to be ignitable.

What does second class honors Division 1 mean?

Degree classifications

First-Class Honours (First or 1st) (70% and above) Upper Second-Class Honours (2:1, 2.i) (60-70%) Lower Second-Class Honours (2:2, 2.ii) (50-60%) Third-Class Honours (Third or 3rd) (40-50%)

Exact Division (1-Digit Quotient) | Mathematics Grade 2 | Periwinkle

Can I get a 2 1 with 58?

Students who achieve a final mark of 58% or 59% will be awarded a degree classification of Second Class Honours, Division I (2:1) provided that they have achieved a module mark of 60% or more in modules at level 6 to the value of at least 60 credits.

What is the difference between Class 1 Division 1 and Class 1 Division 2?

RE: Differences between Class 1 Division 1 and Class 1 Division 2? The definitive reference is the National Electrical Code Chapter 5. Class I locations are ones in which hazardous vapors may or do exist. The difference between Div 1 and Div 2 is the level of expectation that hazardous levels will be present.

Does Class 1 Div 2 require explosion-proof motor?

While Division 1 motors in Class I locations must be explosion-proof, Class II, Division 1 motors must be dust- ignition-proof.

What grade is Division 2?

Division II (Grade 4-6) - Teaching with Games - Subject Guides at University of Alberta Libraries.

How to correct class 2 div 1?

Treatment consisted in extraction of the maxillary first bicuspids and fixed orthodontic appliances according to the philosophy and technique of Roth. Retention was a removable upper retainer and a fixed one on the lower arch.

What are the treatment options for Class 2 Div 1?

There are various ways to treat class II division 1 malocclusions, with treatment options including both removable and fixed appliances. Rapid maxillary expansion followed using a functional appliance is essential in cases with narrow arches with extreme crowding.

What is class I division 1?

Class I, Division 1 classified locations. An area where ignitable concentrations of flammable gases, vapors or liquids can exist all of the time or some of the time under normal operating conditions. A Class I, Division 1 area encompasses the combination of Zone 0 and Zone 1 areas.

What grade is Division 1?

Division 1 consists of a Grade 1, Grade 2, Grade 2/3 and a Grade 3 class. The Division 1 teachers work collaboratively to ensure the success of the students in all areas, but with a focus on literacy and numeracy.

What is the difference between Division 1 and division 2?

D2 schools differ from D1 schools in that they are usually slightly smaller universities. Compared to D1 and D3, D2 has the fewest number of schools with only about 300 colleges. Their programs still cover a variety of sports, however, and D2 schools compete against regional rivals instead of national competitors.

Can a school be Division 1 and 2?

An institution in Division II or III may elect to participate in Division I in one sport, other than football or basketball and must abide by the Division I bylaws governing the sport, even though their membership rests in another division.

Does Class 1 Div 1 mean explosion proof?

Division 1 is a subset of Class I and is classified as an area where the explosive or flammable gases, vapors or liquids mentioned above can exist under normal, everyday operating conditions.

What NEMA is Class 1 Div 2?

NEMA 8 Indoor or outdoor use in locations classified as Class I, Division 2, Groups A, B, C or D hazardous locations as defined in the National Electric Code (NFPA 70) (commonly referred to as oil-immersed).

Is NEMA 4X good for Class 1 Div 2?

Again, the NEMA 4X lighting may not be Explosion-Proof; however, the lighting is suitable for class 1 division 2 hazardous areas.

What is Division 2 in explosion-proof?

Class 1 Hazardous Locations refer to facilities that deal with flammable gases, vapors, and liquids. Division 2 specifies that flammable materials are handled, processed, or used at a location. But, concentrations of hazardous substances are not high enough to be ignitable.

What are the requirements for Class 1 Div 2 electrical enclosures?

Enclosure Construction:Class 1 Division 2 enclosures must be constructed of materials that are non-sparking, non-flammable, and non-combustible. Protection against Ignition Sources:Class 1 Division 2 enclosures must be designed to prevent the ignition of flammable gases or liquids by electrical or mechanical means.

What is an example of a Class 1 Div 1?

A good example of the difference here might be a paint booth: inside a paint booth, normal operation is DEFINED as volatile liquid (paint) being discharged into the atmosphere in a spray of fine droplets – hence, that would be Class I, Div 1.

Is 68 good at Masters?

A typical masters degree will be graded using four terms: Distinction: a final grade of 70% or above. Merit: a final grade of 60-69% Pass: a final grade of 50-59%

Is 69.5 a first?

your final overall mark is less than or equal to 0.5% below the higher classification (for example, a final overall mark between 69.5% – 69.9% would become a First)

Is it easier to get a first at a worse uni?

It is much harder to get a top mark in a top University. This is reflected by the statistics on the number of top grades handed out by Universities, in which the lower quality Universities hand out the highest awards to students most frequently.