What ruins a whiteboard?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

What ruins dry erase boards?

Yes, Clorox wipes and other cleaning products (such as Windex) have the potential to ruin dry erase boards. This is especially true of melamine boards. While Clorox tends to produce excellent whiteboard cleaning results, it also damages or removes the surface of the board over time.

How do you revive a whiteboard?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

What erases whiteboard?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

Why Is My Whiteboard So Dirty?

Does vinegar damage whiteboard?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Does WD-40 restore whiteboards?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

How do you restore a whiteboard that won't erase?

Or, you can prepare a mixture that is 50 percent tap water and 50 percent isopropyl rubbing alcohol. Wipe the whiteboard, then dry it off with a clean cloth to remove alcohol remnants—don't let alcohol dry on the board.

What is the life expectancy of a whiteboard?

Whiteboards that are made from plastic will have a lifespan of between 1-5 years, whereas those made from more durable materials can last from 10-20 years, or even longer. As with any office furnishing, it pays to take good care of your whiteboard.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

Do whiteboards go bad?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Does alcohol ruin whiteboards?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

Does hand sanitizer damage whiteboards?

Often full of isopropyl alcohol, hand sanitizer is another approved compound that can be used to clean off whiteboard marker ink. Whether the active ingredient is isopropyl alcohol or ethanol, the nature of hand sanitizer makes it extremely effective when used to clean whiteboards.

Does WD-40 damage whiteboard?

Firstly, because WD-40 is oil-based, it attracts dust and dirt, making it even harder to clean your board in the future. Secondly, the chemicals in WD-40 can break down the surface of your whiteboard, making it more difficult to write on over time. Yikes!

Should I oil my whiteboard?

A whiteboard is a magnetic surface, so using a magnetic dry erase marker helps keep the board looking new and prevents any ghosting or staining. If you don't have any of those markers on hand or want to use a different type of pen for writing, a very light coating of vegetable oil will also help protect the surface.

Why do whiteboards ghost?

Ghosting is when your dry erase marker ink bleeds into the surface of your board. Ghosting can be caused by one of four reasons; it can be cause by dirty erasers, by erasing marker that is still wet, by using the wrong kind of marker or by using the board too frequently.

When should I replace my whiteboard?

It's time to replace your whiteboard when you can no longer wash your board clean. Usually you'll see a steady progression of discoloring, as regularly cleaning your board can only prevent staining so much. The reason the boards stain is because the dry erase markers have dark inks that are coated in a polymer.

Why do whiteboards get stained?

Accidental use of permanent markers and pens leaves notes behind that can't be wiped away. Removing dry-erase or wet erase marker right away is easy enough, but if the notes are left on the board too long, even these markers will leave stains.

Can you resurface whiteboards?

Replacing new whiteboards is a cumbersome process that takes time, but resurfacing whiteboards can be a very quick process that requires much less manpower. There are many brands and types of resurfacing options available, and it can be difficult to narrow down the many choices.

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Does hand sanitizer clean whiteboards?

To clean a whiteboard, you can use a specially formulated whiteboard cleaner like the expo whiteboard cleaner that are available on Amazon. Or, you can use household products like rubbing alcohol, hand sanitizer, nail polish remover, vinegar, and windex.

Do wet wipes damage whiteboards?

Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.