What ruins dry erase boards?

Yes, Clorox wipes and other cleaning products (such as Windex) have the potential to ruin dry erase boards. This is especially true of melamine boards. While Clorox tends to produce excellent whiteboard cleaning results, it also damages or removes the surface of the board over time.

What ruins a whiteboard?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

What not to use on a dry erase board?

Avoid cleaning your whiteboard with standard kitchen or bathroom cleaner, industrial cleaner, or solution containing isopropanol alcohol, in addition to Coarse or granular cloth like paper towels and toilet paper, as they tend to deteriorate the dry erase surface. Clean your whiteboard at least once a week.

Why do dry erase boards stop working?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

Will alcohol ruin a dry erase board?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

How To Clean Whiteboards and Dry Erase Boards

Will vinegar ruin a dry erase board?

A mixture of vinegar and water is an effective and safe non-chemical way to clean a dry erase board. It has the added benefit of being a natural cleaner that has been used for years.

Does vinegar damage whiteboards?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Will Windex ruin a dry erase board?

Yes, Windex can be used to clean a dry-erase board, but only on certain types of boards. For porcelain and glass dry-erase boards, Windex is an effective chemical-based cleaner. However, Windex can damage the surface of melamine dry-erase boards, so it is not recommended for these types of boards.

Does WD-40 restore whiteboards?

WD-40 “plugs” the microscopic holes in your whiteboard that caused stains — marker ink could get into the holes but then couldn't be erased. Turns out that WD-40 really does fix everything. This will likely cause your room to smell, so I encourage you to open some windows before you do this step.

How do I get my dry erase board to work again?

Spray the whiteboard with WD-40, using a light misting over the whole board. WD-40 is a light oil that will keep the board slick. This allows you to write on it without the ink drying into the board and leaving permanent marks. While it may make the board a bit slippery, it will be usable.

Does hand sanitizer ruin whiteboards?

Most hand sanitizers contain alcohol, similar to isopropyl rubbing alcohol, but they often have other additives such as gels and fragrances. Therefore, hand sanitizers may not be the ideal choice as they can leave residues or cause staining on the whiteboard surface.

Does WD-40 damage whiteboard?

Firstly, because WD-40 is oil-based, it attracts dust and dirt, making it even harder to clean your board in the future. Secondly, the chemicals in WD-40 can break down the surface of your whiteboard, making it more difficult to write on over time. Yikes!

How long do whiteboards last?

These boards can quickly become discolored with daily use, especially when they aren't properly cleaned. The discolored and stained boards can become difficult to write on and even more difficult to see from long distances. You need to replace these boards every few years if you plan on using them daily.

How do you clean a dry erase board that won't erase?

Again, a mix of isopropyl alcohol and water is the best solution to clean a whiteboard, but various other options work just as well. Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner, and peroxide also work well.

What is ghosting on a whiteboard?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.

What is the best cleaner for whiteboards?

WD-40: Ideal for when something isn't moving, and it needs to. This applies not only to nuts and bolts, but to stains on a whiteboard as well. When that whiteboard marker just won't fully erase, spray WD-40 either onto a microfiber cloth or directly onto the board, and start cleaning.

Can I use Windex on a whiteboard?

Can you use Windex® to clean a dry erase board? Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

Can you use magic eraser on dry erase board?

Simply dampen the Magic Eraser with water and gently scrub the surface of the dry erase board to remove the markings and stains. Be sure to test a small area first to ensure that the Magic Eraser does not damage the board's surface.

Can you use Clorox wipes on a whiteboard?

With holiday breaks getting closer, it's about time to clean off the reminders that have been on the white board all season. But that can be surprisingly tough. Some markers just won't wipe off.

Can I use rubbing alcohol to clean dry erase board?

Using rubbing alcohol will get your whiteboard clean and white. But don't use straight rubbing alcohol too often, or it can wear down the top layer of your board. Instead, use it when you're dealing with stubborn marks.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

Can you restore a dry erase board?

Introduction: Returning a whiteboard coated surface to its full dry-erase capacity can be accomplished in several ways, including (1) thoroughly cleaning your erasers and then using them to clean your surface; (2) using a clean microfiber cloth to do the job; and (3) and using a clean microfiber cloth along with water ...

What is the difference between a whiteboard and a dry erase board?

To clear up this confusion, you can rest assured that the expressions whiteboard and dry erase board are synonymous; that is, they have exactly the same meaning.