What should you not use to clean a dry erase board?

Never use plastic or metal scouring pads, abrasives or scraping tools – all which can damage the surface, thus allowing ink to penetrate it and create a stain. With regular cleaning – and using the right materials, the dry erase surface of your whiteboard should stay white and bright for many years.

What should you not clean a whiteboard with?

For porcelain and glass dry-erase boards, Windex is an effective chemical-based cleaner. However, Windex can damage the surface of melamine dry-erase boards, so it is not recommended for these types of boards.

What damages whiteboards?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Does vinegar damage whiteboards?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Can I use baby wipes on whiteboard?

Baby wipes may not be the most ideal choice for whiteboard surfaces because their moisture may not be sufficient for effective cleaning of the whiteboard surface. Additionally, baby wipes usually contain gentle moisturizers that can leave residues or cause staining on the whiteboard.

The BEST WAY to Clean a White Board (Dry Erase) Easy, Quick, CHEAP!

Does hand sanitizer clean whiteboards?

Often full of isopropyl alcohol, hand sanitizer is another approved compound that can be used to clean off whiteboard marker ink. Whether the active ingredient is isopropyl alcohol or ethanol, the nature of hand sanitizer makes it extremely effective when used to clean whiteboards.

Can you use WD40 on dry erase board?

Sure, using WD-40 might temporarily remove those stubborn stains and markings that regular cleaning methods can't handle. But don't be fooled, my friend! It's not a long-term solution. In fact, it can actually make things worse!

Can you clean a dry erase board with bleach?

Do not use bleach.) Keep your marker tray clean so no dirt or debris sticks to your cloth when erasing, which could scratch the writing surface.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

How do you refresh a dry erase board?

Spray your whiteboard generously with WD-40 using the spray nozzle (not the tube.) I cover the edges of my whiteboard with painter's tape to avoid spraying the wood finish. Use a paper towel to spread the coating evenly across the entire whiteboard.

What is the life expectancy of a whiteboard?

These boards can quickly become discolored with daily use, especially when they aren't properly cleaned. The discolored and stained boards can become difficult to write on and even more difficult to see from long distances. You need to replace these boards every few years if you plan on using them daily.

Can coffee clean a whiteboard?

There are also DIY enthusiasts who suggest using coffee grounds to remove stains on a whiteboard, and then rinsing the residue with mild soap and water. Of course, baking soda mixed with some water also works wonders. Remember, though, that some cleaners are formulated to be a little more powerful than others.

Can you clean a whiteboard with a wet paper towel?

Paper Towel and Water: This is a quick, chemical-free way to clean the surface of your board, but may not remove old stains or ghosting.

Can I clean a whiteboard with dish soap?

Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.

Does vinegar remove dry erase?

Vinegar. Many acids work well with dry erase marker stains, and acetic acid is no exception. It is better than removing the black marker with expensive store-bought detergent. Using a cotton swab dipped in vinegar, wipe the marks from the edge to the center, then wash the item.

Can you use alcohol wipes on a dry erase board?

Avoid cleaning your whiteboard with products containing alcohol, ammonia, bleach, or any harsh chemicals. These substances can damage the whiteboard surface and reduce its lubrication over time, resulting in whiteboards that are difficult to clean.

Is whiteboard cleaner just alcohol?

Most will contain Isopropyl alcohol to dissolve the marker ink, water, and a bit of soap to remove body oils from the white board. Surfactants, fragrances and other chemicals may also be used.

Can you use eye glass cleaner on dry erase board?

Put some hand sanitizer on a piece of paper towel and wipe the Whiteboard down. Then use a water dampened piece of paper towel to wipe the residue off and then dry the Whiteboard off thoroughly with a soft cloth. Spray the Whiteboard with eye glass lens cleaner or with iPad/iPhone cleaner.

Can I use glasses cleaner on a whiteboard?

Yes, glass-cleaning products such as Windex® are recommended for cleaning the dry erase surface of a whiteboard.

How do you clean a whiteboard with baking soda?

Add a small amount of water to baking soda. Rub the paste into the old marks on the board. Thoroughly wipe the paste off with a damp cloth or paper towel. This works well on marks made by permanent marker.

What is the difference between a whiteboard and a dry erase board?

The Terms “Whiteboard” and “Dry Erase Board” Have the Same Meaning. To clear up this confusion, you can rest assured that the expressions whiteboard and dry erase board are synonymous; that is, they have exactly the same meaning.

Can dry erase boards go bad?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.