Why is my whiteboard so hard to erase?

Some surfaces either grow rough with time and wear, making tiny grooves that are hard to clean completely, or the material reacts with the ink and the ink dissolves it a little and really sets. If the cleaning agents don't work, or fresh marks are also very hard to remove, then it's probably time for a new board.

How do you fix a whiteboard that won't erase?

Isopropyl Alcohol – similar to methylated spirits the high alcohol content when used with a soft cloth helps to dissolve and loosen stubborn ink whilst also degreasing the whiteboard surface helping to prevent staining. The alcohol evaporates leaving a clean surface behind.

How do you make a whiteboard easier to clean?

Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.

Why do whiteboards stop erasing?

While the dry erase marker typically wipes clean from surfaces, most whiteboards have a slight static charge to help the pigment stick to the surface. Over time whiteboards no longer wipe clean and can leave ugly stains and ghosted images.

How do you get stubborn stains out of a whiteboard?

For vinegar solutions, use about 1 teaspoon per cup of water – or up to a 1:1 ratio. If using rubbing alcohol, select a product that is 90% to 99% isopropyl alcohol. More diluted solutions are not as effective. Spray the solution onto the surface, let it sit for a few seconds, then wipe it clean.

Why Is My Whiteboard So Dirty?

Does rubbing alcohol damage whiteboards?

When rubbing alcohol is used to clean the board, it can dissolve this coating, making it less effective at erasing ink in the future. Additionally, using rubbing alcohol too frequently can cause the whiteboard to become dull and faded, reducing its lifespan and usability.

Is vinegar bad for whiteboards?

Vinegar and water: Opt for this homemade solution of vinegar and water when you want to clean without harsh chemicals. Mix one teaspoon of vinegar with one cup of water. Along with a microfiber cloth to wipe the whiteboard, this is a classic cleaning method.

Can I use Windex on a whiteboard?

Yes, Windex can be used to clean a dry-erase board, but only on certain types of boards. For porcelain and glass dry-erase boards, Windex is an effective chemical-based cleaner. However, Windex can damage the surface of melamine dry-erase boards, so it is not recommended for these types of boards.

Does WD-40 clean whiteboards?

Sure, using WD-40 might temporarily remove those stubborn stains and markings that regular cleaning methods can't handle. But don't be fooled, my friend! It's not a long-term solution. In fact, it can actually make things worse!

What is ghosting on a whiteboard?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.

What is the best cleaner for whiteboards?

WD-40: Ideal for when something isn't moving, and it needs to. This applies not only to nuts and bolts, but to stains on a whiteboard as well. When that whiteboard marker just won't fully erase, spray WD-40 either onto a microfiber cloth or directly onto the board, and start cleaning.

What is the best material to erase a whiteboard?

Magic Eraser: By wetting a magic eraser, you are able to clean the whiteboard's surface while removing stains and ghosting. Used Fabric Softener Sheet: A fabric softener sheet will not scratch the surface of your whiteboard, but can effectively remove dry erase ink that is on the white board for less than 24 hours.

Can you use a magic eraser on a whiteboard?

Ideal for the thorough cleaning of almost all types of whiteboard, for example for removing "ink shadows". Please test in an inconspicuous area before use! The abrasive foam works like very gentle sandpaper.

What not to use on a whiteboard?

Use the right markers.

(Your instruction manual may also have suggestions on which markers you should use.) Make sure you don't use Sharpies, highlighters, or Mr. Sketch markers. If you do, there's a good chance you'll never be able to get your writing off the surface, leaving you with a ruined whiteboard.

Can I use car wax on a whiteboard?

Apply a generous layer of carnauba wax onto the whiteboard. The wax is usually found in the automotive car section of mass merchandising stores. The paste will come with an applicator pad or you can use a small cotton cloth. Be sure to cover the entire board.

Can you use hand sanitizer to clean a whiteboard?

-Hand sanitizer: Most hand sanitizers contain alcohol, similar to isopropyl rubbing alcohol, but they often have other additives such as gels and fragrances. Therefore, hand sanitizers may not be the ideal choice as they can leave residues or cause staining on the whiteboard surface.

Can you use Clorox wipes on a whiteboard?

With holiday breaks getting closer, it's about time to clean off the reminders that have been on the white board all season. But that can be surprisingly tough. Some markers just won't wipe off.

Can you clean a whiteboard with alcohol wipes?

To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.

Can you use Clorox to clean a whiteboard?

Clorox with Bleach: While we liked that you could spray the solution directly onto the whiteboard, it dripped down a lot, so you had to wipe it up right away. The Clorox seemed to perform best on the traditional whiteboard surface (not paint or film), and when the staining wasn't too severe.

Can you use Dawn on a whiteboard?

Spray a small amount onto a microfiber cloth before use. Mild Detergent and Water: Dawn dish soap works great with a bit of water to remove residue and built-up oils.

How do you make a dry erase board work again?

Very stubborn stains can be removed with a little propyl alcohol. Or, you can prepare a mixture that is 50 percent tap water and 50 percent isopropyl rubbing alcohol. Wipe the whiteboard, then dry it off with a clean cloth to remove alcohol remnants—don't let alcohol dry on the board.

What is the difference between wet erase and dry erase?

Wet erase markers contain water-soluble dyes and are intended for acetate, film or non-porous laminated surfaces. Wet erase markers can only be removed with a damp tissue or cloth. Dry erase markers erase with an eraser on most non-porous materials, like whiteboards, porcelain, melamine and glass.

Can I use baby wipes on whiteboard?

Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)

Can acetone clean whiteboard?

Only use erasers specifically designed for white boards. Do not use abrasives on white boards or you can damage the surface. Do not use Magic Erasers or they will scratch the surface. Do not use acetone or mineral spirits to clean whiteboards.

Can you use acetone on a whiteboard?

So, technically Yes, you can use acetone At Least Once to clean a whiteboard, but it degrades the surface of the whiteboard after that.